Automated Liquid Filling Machine
Home › Products › Automated Liquid Filling Machine
Business Type : Manufacturer, Exporter
Features
- Conversion of Fresh Oil / Used Oil to NAS 8/7/6 Grade
- 550 ltr/hr. max Clean Oil Output
- 750 ltr. on board Clean Oil Storage
- PLC / HMI automated filtration cycle
- Vacuum dehydration for water content PPM level optional
- Hydac make on line contamination sensor
- Hydac make water PPM content sensor
- Sampling Valves for performance testing at all filtration stages
- Four point level control in all storage and process tanks
- Performance guaranteed with Indigenised low cost filter element
- On line checking and display of NAS level optional
- Accessories (Optional)
- Dirty oil collection tank
- Engine/Transmission Oil draining system
- Piping/Cabling for transfer of dirty oil
- Dispensing System for clean oil on assembly line
- Interfacing of fresh oil transfer pumps from bulk tanks
- On line checking and display of water PPM content optional.
- Design and component selection ensures low running cost
- Complete trunkey solution with dirty oil Storage Tanks/Piping/ Cabeling and Clean Oil Dispenser
Read More...
Oil Draining and Filtration System
Business Type : Manufacturer, Exporter
Series 6710 Standard Liquid Filling Machine
Business Type : Manufacturer, Exporter
Features
- Suits container filling of 1,5,10,20,30 litre containers
- Accuracy ±5.0 ml per container batch
- 16 programmable batches available
- Maximum dispensing flowrate of 1000 LPH
- Display
- 16x2 Backlit Dot Matrix
- Display parameters - set batch quantity with ident
- Delivered quantity with auto-zero
- Requires a pneumatic air supply of 4 kg/cm2
- Provision to fill, foaming type of liquids with ease
- Single machine can fill different types of liquid in batch production
- Diagnostic Alarms
- Low liquid level
- Low air pressure
- No wash water supply
- No flow through nozzle
- Unique water & air washing and cleaning cycle for changing liquids
- PLC control with MMI with finger tip selection of batch size and setting
- Fully constructed in SS316 for corrosive liquids and environments
- Provision for optimising accuracy while filling any liquid
- Zero drip filling nozzle to ensure clean shop floor
Read More...
Series 6740 Standard Liquid Filling Machine
Business Type : Manufacturer, Exporter
Features
- 5.0 - 250 ml batch filling ideally suits shock and fork filling
- Filling accuracy ±1.0 ml for any batch size with Cp/Cpk >1.66
- 4000 ml / min filling rate optional for ±2ml resolution
- Quantity setting range - 5-500 ml
- Built-in 100 Litre oil storage tank
- 25 micron built-in filtration
- Requires a pneumatic air supply of 4 kg/cm2
- Display
- 16x2 Backlit Dot Matrix
- Display parameters - set batch quantity with ident
- Delivered quantity with auto-zero
- Filling rate of 2000 ml / minute gurantees a high production rate
- Quickly adjustable filling nozzle height to suit tube and fork length
- Zero drip dispensing nozzle for clean shop floor environment
- PLC control with MMI allows finger-tip batch selection and settings
- Built in 25 micron oil filtration before filling
- Power Supply - 3 Phase 415V AC, +/-10%, 50 Hz
- Dual fork assembly filling option for improved productivity
Read More...
Series 6780 Evac and Fill Dispensing System
Business Type : Manufacturer, Exporter
Features
- Machine cycles are as evacuation-filling-suckback-gun purging
- High evacuation up to 0.5 mbar suitable for braking systems
- Filling pressure adjustable to 3.5 bar adjustable
- Built-in liquid reservoir of 60 litre deaereation capacity
- Liquid suck back for maintaining oil level in reservoir
- Leak check for positive pressure during Evacuation cycle for vaccum
- Leak check for positive pressure during filling cycle
- Self test for main vaccum pump efficiency
- Light weight dripless nozzle
- Fully automatic operating cycle, zero operator interference
- Diagnostic alarm for easy maintenance and system fault finding
- Compact size design confirms to TPM standards
- Leybold vacuum pumps
- SMC filling pumps and pneumatics
Read More...
Business Type : Manufacturer, Exporter
Features
- Programmable multiple batches to suit a variety of vehicle models
- Accuracy guaranteed to ± 0.01 ltr per batch filling
- Liquid input from barrels, overhead tanks, built-in storage tank
- Cp/Cpk >1.66 for filling all types of liquids
- Built in double filtration of 150 micron
- Batch Quantity Selector
- Manual Selection
- Selection via barcode reader
- Zero drip high capacity filling gun with customized spout
- Pneumatic dispensing operated high capacity zero drip
- Built-in air seperator for barrel transfer application
- Batch selector keys - 0.01 Ltr - 999.99 Ltr user selectable
- Finger tip Start / Emr. stop function on the filling gun radiator filling
Read More...